How to use water-based ink?

Jun 15, 2022 Leave a message

1. Completely remove the release agent or grease on the surface with special treatment agent or special cleaner to improve the adhesion.

2. Before using water-based ink, the operator shall fully stir the ink used evenly to avoid color separation and sedimentation caused by long-time storage affecting color difference.

3. Usage ratio of hardener: For printing I, water-based ink provided by the company: water-based hardener: thinner (deionized water) 100:5-10: appropriate amount.

4. The ink added with hardener must be fully stirred for more than 3 minutes before use (uneven stirring will cause poor adhesion). It should be finished within 4 hours!

5. The standard curing and drying time of water-based ink is 24 hours. If the temperature is low, the drying time needs to be extended or the drying temperature needs to be increased by 60 degrees!

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry