Knowledge

Mimaki UV ink is a type of ink used for UV curing printing, featuring the following characteristics and related knowledge: Features and Advantages: - Good environmental performance: Mimaki UV ink It b

DTF film is a thermal transfer material, full name is Direct To Film, which means directly transfer to the film. Here is introduction to its classification and usage: Classification of DTF film : - By

3D Embroidery UV Ink is a specialized type of ultraviolet (UV)-curable ink designed to create raised, three-dimensional effects on embroidered textiles. It combines traditional embroidery techniques w

The DTF Ink is a special INK for direct printing of film transfer process (DTF) .

There is UV ink on the clothes, which can be wiped off with alcohol or detergent. UV ink can be washed off with alcohol or detergent. It is recommended to wash clothes with alcohol, and pay attention

1. If the ink does not exceed 24 hours, it can be wiped off with alcohol; 2. If the ink lasts for more than 24 hours, wipe it off with hydrogen peroxide or Tiannao water.

1. Hardness test with pencil The technical conditions for the use of UV ink include pencil hardness. According to this requirement, we can use a pencil hardness tester to test. If the requirements are

The UV ink of the UV flat panel printer can be stored for one year without use. After more than one year, the ink will deteriorate, the dye molecular activity will be reduced, and the printed pattern

If UV ink is smelled too much, it will affect people's respiratory system and cause certain damage to mucous membranes and lungs Uv printing ink is toxic, because it contains a small amount of voc che

1. The drying speed is fast. The coating is prepared with special chemical materials and used with weak solvent ink. It can be dried within one minute after printing, especially on smooth materials su

The water-based ink can be mixed with water before drying. Once the ink is dry, it is no longer soluble in water and ink. Therefore, the water-based ink must be fully stirred before use to keep the in

PH value of water-based ink is directly related to the viscosity, dryness and other printability of water-based ink. The experiment shows that the viscosity of water-based ink increases linearly with